Low Cost Plaster Board PVC and PET Laminating Line with Cutting and Packing System

Gypsum board lamination machine is to laminate fiber glass, paper, PVC film and aluminum foil on gypsum board. The finished products can be used as ceiling tile and partition wall panel.

7000-20000m² per day
(basis of calculation: L:595mm, T:7mm, W:595mm, weight: 5.5 kg/m², for 7mm board)

Simple and high degree automatic

• Gypsum board
• PVC film
• Aluminum foil
• Glue for PVC
• Glue for aluminum

Length*Width: 595*595mm, 600*600mm, 603*603mm, 1200*600mm

Thickness: 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm

Gypsum board lamination machine is to laminate fiber glass or paper or PVC film and aluminum foil on gypsum board.

• Lamination width: 1220mm
• Gypsum board size: 1220*2440mm
• Glue: specific glue for PVC film and aluminum foil
• Max sheet speed: 2/15m/min
• Thickness of sheet: 2-50mm
• Motor power: 4.5kw coating and lamination part are driven by chain wheel

Two types for choice:

1. Push-type
2. Suction-type

Cylinder push, photoelectric control, Max.Cylinder range 700mm. Through the push board platform rubber roller rolling transmission to accelerate speed, with the feature of low cost, economic and affordable (comparing to the suction type), easy to operate, fully automatic feeding.

This machine is used for cutting the laminated gypsum boards to a size of board according to saw gauge standard. First, put board to delivery roll, then come to the cutting system for the first time, and it turns to cutting system for the second time though delivery roll, then come to the board. It can be made a set of pulsed sack-duster for requirements.